Under normal circumstances, a circuit breaker lasts for years without ever needing repair or replacement. However, from time to time a circuit breaker will actually “break.” Diagnosing a circuit breaker problem is not a project that an amateur should attempt on his or her own. Only the most skilled do-it-yourselfers can handle this project. Unless you are skilled in electrical safety practices and the proper use of electrical test equipment, contacting an electrician in Los Angeles just makes sense.
If you have a breaker that is tripping regularly, more than likely the breaker is doing its job—the circuit is just overloaded. A skilled electrician Los Angeles can test this by using an ammeter—a tool that is used for testing the amount of electricity going through the circuit. Another problem that occurs regularly is that the breaker will not reset after tripping. In this case, the problem is more likely in the line of electricity rather than the breaker. In most cases the line has a fault and the breaker will (purposely) not reset until the fault is cleared.
When an electrician comes to test your breaker, he will likely first test the voltage at the breaker terminal. Generally, the reading should show 120 VAC. If this appears correctly, he will load the circuit and test again. If voltage drops at this point, there is a good chance the breaker is bad.
Since this is a job that is so in-depth and difficult, calling an electrician from The Electric Connection is highly recommended. These experts have years of experience and training, so they are able to review your problem and determine the best way to proceed. There is no use in taking risks when it comes to your safety and the safety of your home; an experienced electrician is just a phone call away.