Why do breakers trip? Have you ever turned on the vacuum or started the microwave while the toaster was in operation and experienced a tripped breaker? If you have ever dealt with a breaker that trips, you are probably wondering why it happened and want to know what that means for the safety of your home. An electrician in Pasadena is here to explain. You can learn more by calling The Electric Connection.
First of all, it is important to explain what a tripped breaker really is. Your breaker panel is probably located outside or in a hallway or basement area. When a breaker trips, it cuts off all flow of electricity to the outlets and light fixtures that the particular breaker supplies electricity to. When looking at the breaker panel, the tripped breaker will be slightly in the middle instead of all the way left or right. An orange bar is usually used to indicate which breaker has tripped.
As far as why the breaker trips, there are 3 main reasons
• Ground Fault
• Overloaded Circuit
• Short Circuit
An overloaded circuit is probably one of the most common reasons. If your breaker isn’t powerful enough to run several appliances at once, like the microwave, vacuum and toaster, it becomes overloaded and shuts down. You can address this by distributing your electrical draw to different outlets that are run by different breakers or by having your Pasadena electrical system investigated. You may be in need of additional breakers.
A ground fault or short circuit are much more dangerous than an overloaded circuit. Breakers that have bare wires or a bad connection can cause fires. If you don’t see anything out of the ordinary, but are still having trouble with a tripping breaker, give the folks at The Electric Connection a call.