panel upgrade Archives

How to Pull an Electrical Permit in Los Angeles

Posted on December 23, 2020 | by K Hopkins

Not all projects require a permit, but most electrical works do. In Los Angeles, it’s easy to pull an electrical permit if you meet all the requirements. Since pulling permits differ from state to state, we have put together the Los Angeles guide you need.

An electrical permit is an approval you get from your building department to go ahead with electrical projects in a home.

In Los Angeles, you will need electrical permits for any kind of electrical works. These include work related to;

All residential and commercial buildings
Installing a new electrical panel
Installing a new sub panel
New buildings or addition to a building
Any electrical installations over 600 volts.
Installations of lighting including exits lighting and security lighting.
Installations in hazardous locations.
New, expanded, or replaced electrical items
Installation of a complicated electrical system as determined by the Department, such as Emergency, Legally Required Standby, Fire Alarm, and Gas Detection Systems.

The Permit Process

To pull an electrical permit in Los Angeles, you must first file electrical plans with the indicated department. These plans and the first step are referred to as electrical plan check. Only when this plan check has been approved or deemed not required will a permit be issued.

Electrical permits in Los Angeles can also only be issued to an electrical contractor with the appropriate license, the property owner, and or an agent representing either the contractor or the property owner.

Why it’s important to pull a permit when necessary?

Pulling a permit in Los Angeles may seem like a hassle to you, but it’s necessary if you want to avoid certain unfriendly situations. Electrical work carried out without a permit is considered illegal. Such unpermitted work can cause even more problems in the future if the option of a resale comes up. There’s also no assurance that the work was done up to code.

Where can I obtain the permit in Los Angeles and how much time is involved?

You can obtain an electrical permit from the local Building and Safety District Office serving your area. For online permits, you can go through Los Angeles County’s Electronic Permitting and Inspection (EPIC LA).

For simple projects that do not require a plan check, you can get an express permit when you apply online.

For small-medium projects, a plan check can take 45-60 minutes and as the projects get larger, plan checks extend to even weeks.

After obtaining the permit, the permit expires within 12 months if work has not started from the time it was issued.

It’s possible to get an extension on your permit, but that might require an extra fee.

How to make obtaining an electrical permit in LA easy

Start by hiring a professional and licensed electrician for your electrical needs. It’s legal, easier, and safer to let this experienced technician pull the permit for your project. All you will need to do is likely to bear the cost.

Licensed electricians can get permits faster and pass inspections easily too. They are also updated on current codes, and this saves you any future problems.

Tesla Charger Installations in Beverly Hills Homes

Posted on December 14, 2020 | by K Hopkins

Statistics show that over 4.8 million electric vehicles were in use globally in 2019. With sales of electric cars rising each year, owning one might just be a healthy trend here to stay.

If you’ve joined the growing number of EV drivers, then you probably know owning these sleek and convenient Tesla vehicles involves establishing a solution for charging needs.

Most people install a charger in their Beverly Hills home while others depend on public charging. A Tesla charger installation in your Beverly Hills home is certainly the best option, so read on to see what is involved.

Facts about installing a Tesla charger in the home

You may need to upgrade your electrical system

Electric cars charge their battery with electric power, and that requires a lot of electricity. To install a Tesla charger, your home must have the capacity for it, otherwise you’ll need a service upgrade first.

There are levels involved

Tesla charger installation in Beverly Hills homes comes with making a choice between slow chargers and fast chargers. These are level 1 and level 2 Tesla chargers, respectively. Installing a level 2 fast charger is always the ideal option, but depending on your needs and preferences you might opt for a level 1. Level 1 chargers are cheaper and will not need you to upgrade your service panel to use them. They draw little power and charge as slowly as 3-5 miles/hour. Level 2 chargers are faster and suitable for home use. They also require expertise to set up, and if your system can’t accommodate the 240-volts level 2 charger/ outlet, you will need that upgrade.

You have specific locations for the installation

A Tesla charging station should be installed in your garage or driveway. This is both safer and ideal because they are areas where you park your vehicle overnight. If none of these is workable for you, your electrician can help with determining a suitable spot.

Manufacturers play a role

There are various electrical vehicles on the market and not just Tesla. The manufacturers’ instructions or recommendations for your specific EV play a role in many things you do.

How to get Tesla charger installations in Beverly Hills

Find the right electrician

Installing your Tesla charger isn’t a DIY project. You shouldn’t try it yourself at all. You will need a professional electrician who is experienced with EV charger installations. Ask for recommendations near you or skip the hassle and contact us here.

Request a quote

The installation quotes for EV chargers can vary across electricians. Be sure to ask your electrician for his quotes beforehand and compare if you have other options. But never choose based on the cheapest price.

Order your Tesla charger

There are various brands for EV chargers, and Tesla also offers its dedicated charging systems. Order your charger and have it ready for installation.

You can get away with consistent public charging, but it’s not all free and convenient as a charger installed in your Beverly Hills home.

Rewiring a Beverly Hills Home

Posted on November 23, 2020 | by K Hopkins

Your Beverly Hills home wiring is vital for electrical safety and functionality, and in some situations where it becomes inadequate, you will need to rewire your home.

Rewiring can be a major project, but with proper planning and the right professional, it can be completed successfully and quickly.

Choosing a pro or going DIY

When it comes to any electrical works, you will always be encouraged to hire a professional electrician. Sometimes it might seem like an expensive option you can do without by going DIY. See the pros and cons of doing it either way to make the choice for rewiring your Beverly Hills home.

Hiring an electrical technician (PROS)

It keeps you and your home safe
The electrician obtains the permit
An experienced and licensed electrician is up to date on local codes
Inspections can be passed immediately and smoothly
Professional electricians have insurance that protects you from responsibility if anything goes wrong.
Cheaper in the long run
Rewiring by an experienced electrician is much faster
Get a quote on your house rewire from a professional

Hiring an electrical technician (CONS)

A costly option initially
It might be hard to find a dependable electrician

DIYing your rewiring project (PROS)

Saves you money initially
You can rewire your home at your preferred pace

DIYing your rewiring project (CONS)

You will spend time – as much as weeks- planning and doing the dirty work like running wires, cutting, drilling, installing, and more.
You will need to know the local electrical codes
Obtaining the permit falls to you and passing inspections can be tougher when you DIY.
DIYing your Beverly Hills home rewire puts lives and properties at risk.
You take responsibility for anything that goes wrong and often permits require that you must stay in the home where you DIYed for a year.
Insurance companies can deny your claim based on electrical works done as DIY projects

Understand what it involves

Every homeowner’s needs differ in home rewiring. The only way to know what will be involved in your home rewire is to call an electrician for an inspection. You might need to replace your breaker with a bigger one if it is undersized. Older homes often used breaker panels of 60-100 amps, but modern homes use 100-200 amps and sometimes more. The reason for this change is that modern homes have far more electrical power demands/appliances than older homes. Also, safety codes have changed over time to accommodate electrical needs.

The rewiring project can also include replacing old outlets and fixtures, GFCI, and proper grounding.

Your electrician will inform you of any repairs, replacements, upgrades, and more relevant to your home rewire.

What to expect when rewiring your home

Rewiring can be disruptive. It’s almost expected because you will have wires been run through the house, holes drilled in the walls, opening ceilings to give the electrical contractors access, and so on. It can get messy and the electrical power to the home will be shut off while the work goes on.

The good news is, the right electrician can complete a home rewire quickly and in a hassle-free manner. Contact us today for your Beverly Hills home rewire.

Reasons to Upgrade to a 200 Amp Service

Posted on November 20, 2020 | by K Hopkins

You certainly love the confidence and convenience of plugging in any appliances you need whenever you need them. You love this so much that it becomes easy to forget that your electrical panel cannot give more than its capacity.

According to experts, electricians, recent electrical codes, and homeowners who have had unique experiences, the standard capacity for an electrical panel is a 200 amp service. If you have less, then you probably require an upgrade. Here are all the reasons why.

Amps and Your Electrical Panel

The industrial grey box in that safe, dry area of your home distributes electrical power across circuits that serve you. This box is the electrical panel or breaker box, and every panel has its dedicated capacity. Depending on how much power you need, your electrical panel can be between 100-400 amps.

Old homes often used 60-100 amps panels because they had fewer electrical demands. Using similar sized panels in these modern times can be insufficient for your home needs. It can lead to fire hazards, lights out, faulty appliances, and much more.

Why upgrade to a 200 amp electrical panel

To enjoy increased capability and safety

Electrical panels often work at a certain maximum capacity. This helps to ensure the safe working of the panel. Going over this safety threshold can not only cause your breaker to trip, but can also lead to a fire caused by overloading circuits/outlets.

More circuits

With an upgraded 200 amp panel, you get enough room for dedicated circuits. This further improves electrical safety and allows you to run an increased number of appliances and more power demanding appliances without your breaker tripping.

Future demands

Switching to a 200 amp breaker is one of those good decisions that helps you prepare for the future. With this service upgrade, you can add new devices, remodel your home, and do much more without worry.

Everything is just easier

Another solid reason to upgrade to a 200 amp service is the increased efficiency you get to enjoy. Everything is simply much better and easier with a 200 amp panel. The panel is easy to reset and repair with compatibility for GFCI circuits.

How to know you need an upgrade

Breaker tripping frequently
Dimming lights, especially when appliances are turned on
Buzzing or crackling sounds.
Breaker won’t reset

Always confirm the exact source of your electrical issues from your electrician.

Humming Noise from Electrical Panel

Posted on October 30, 2020 | by K Hopkins

You are right to worry about suspicious buzzing or humming electrical noises around your home. Electrical systems are designed to work quietly, offering you power and efficiency with no hassle.

Your electrical panel controls the power supply in your home while keeping you safe from electrical hazards. Hence, any annoying or worrying sounds from the panel could indicate problems of different kinds. See what these noises could be and what they might mean below.

A light buzzing sound

By a light buzzing sound, we mean a faint buzzing sound from your breaker. It’s not the type to keep you up at night or be highly noticeable. The cause is often current flowing through the breaker, like water flowing in some direction. This light buzzing sound is generally normal and harmless. But, if it gets louder or involves clicking and other horror-movie sounds, be sure to call an electrician.

Medium humming sounds

This sound is louder and more obvious than a light buzzing sound. It can take various forms such as a sizzling noise, sparking, a clicking noise, or a humming breaker. So you can hear sizzling sounds with occasional sparks and this certainly means something is wrong with the circuit breaker. The cause may be frayed and loose wiring which is incredibly dangerous and an electrical hazard. It is necessary to call an experienced electrical technician to replace and repair the wiring quickly.

Loud and continuous buzzing sounds

Now, this is what keeps you up at night. Constant loud buzzing sounds can be disturbing because they are loud. The cause often stems from the breaker not tripping when it should, and this, in turn, indicates that the breaker is bad. Your electric breaker shuts off the power supply during a power surge to protect your home. But when it fails to do this the flow of current to the wires increases leading to a buildup of heat, the loud buzzing sound, and an electrical hazard. Circuit breakers go bad for several reasons such as wear and tear and a faulty panel. This humming noise should not be ignored, and an electrician should be called immediately.

A buzzing and humming sound is normal if…

The sound isn’t loud as we have described above.

If the buzzing sound starts right when your AC comes on but stops once the appliance is working smoothly.

Trying to solve this electrical issue yourself can be very dangerous. Therefore the first and safest way to solve humming and buzzing noise from your electrical panel is to call a licensed and experienced electrician.

It may be time for an electrical panel upgrade — contact an electrician for more information.

What’s the Cost To Replace Federal Pacific Electric Panel?

Posted on September 30, 2020 | by K Hopkins

A safe electrical system is invaluable to every home and if you have a Federal Pacific Electrical Panel (FPE), replacing it is the best solution to ensure your electrical safety.

Federal Pacific Electrical Panels are commonly found in homes between 20 and 70 years old. These panels were first introduced by Reliance Electric in the 1950s and quickly became installed in millions of homes across the country. It was soon discovered that FPE panels were unsafe and present a great risk to homes that use them.

Your home’s electrical panel distributes electrical power safely across all circuits. It is also built to ensure protection by tripping off in situations like a short circuit, circuit overload, power surge, and so on. If the breaker cannot do this, the chances of an electrical fire starting increase dangerously.

How an FPE breaker puts your home in danger.

According to reports from the United States Consumer Product Safety Commission (CPSC), Federal Pacific breakers may fail to trip during an overload or short-circuiting. FPE breakers have recorded high rates of not tripping when necessary for your electrical protection. It was also discovered that the breakers tend to enter a lock-up. A lock-up describes a situation where a breaker that has tripped once will never trip in the future regardless of dangerous conditions like an electrical overload.

Studies estimate over 2,800 electrical fires caused each year by a Federal Pacific Electrical Panel that didn’t trip.

Most of the unreliability of the panel is due to the use of cheap materials in its manufacture and their limited original design.

Distinct risks and problems posed by a Federal Pacific breaker also includes;

The crowded wires often found within the panel box.
The breakers to do not switch off even in the OFF position.
Arcing occurs at the bus.
The Federal Pacific breakers trip unexpectedly when the dead front cover is removed.
Breakers are often not tightly connected to the bus bar.

Electrical inspectors always encourage homeowners to replace and not repair a Federal Pacific Electrical Panel. Electricians may also hesitate or refuse to fix problems with these panels because they cannot guarantee the results or your electrical safe afterwards.

Identifying a Federal Pacific Electrical Panel

You may have a Federal Pacific Electrical Panel if your home is as old as between 20 to 70 years. Since the company no longer exists, you can’t purchase a new FPE panel. It can only be present if it was installed in older homes. You can identify an FPE panel with the labels or logos on the front cover. The common appearance is an orange and white label.

You can also look out for the name Stab-Lok written inside the panel or on the breaker. A signature red label across the front of the panel is another indication.

The cost of replacing a Federal Pacific Electrical Panel may vary across electricians, location, and other factors. The replacement can generally cost anywhere from $1500 to $2000, and even more.

The replacement will include any necessary repairs, rewiring, moving the panel location, and installation that are up to recent codes.

Signs of Electrical Problems in Homes in Southern California

Posted on September 25, 2020 | by K Hopkins

Your electric system works 24/7 providing the power you need to make life easier. While you might wish this efficiency can last forever, this is usually not the case.

The good news is, despite how complicated electricity can be for inexperienced eyes and hands, there are signs of electrical problems you can look out for as a homeowner in Southern California.

Staying alert or watching out for these signs can protect your home from severe issues like electrical fires. It can also help you spend less on repairs or replacement when the problem is discovered on time.

Here are 7 signs to look out for.

Unfamiliar or burning smells

Electrical burning smells can be hard to miss. This makes it easy for you to find the source by following the smell. If the strange or burning smell is coming from an outlet, your panel, or any other electrical installation stop using it immediately and call an electrician. Burning smells may indicate that damage or an electrical fire has begun. At the same time, new appliances often emit a strange odor when they are first installed or plugged in. This could stem from the finish, paint, or material used on the appliance and nothing serious.

Flickering lights

Flickering lights indicate a power surge or damage to your electrical wiring. When your lights flicker, buzz, or dim when turned on, or if an appliance is plugged in, then your system likely needs an upgrade. You can call an electrical technician to inspect and determine the problem.

Buzzing sounds

Buzzing sounds from your fixtures, switches, outlets, or appliances can be worrying. These installations should mostly operate silently. If you hear consistent buzzing noises call an electrician to fix the electrical issue.

Frayed or chewed wiring

Pets, rodents, cheap products, and inexperienced handymen can lead to frayed or chewed wiring in your home in Southern California. This sort of damage is both a shock and fire hazard that should be handled immediately. Contact your electrical contractor in Southern California to inspect your entire wiring and replace any damaged parts.

Warm or sparking wall outlets

If wall outlets or switches are warm to the touch, they may indicate loose or damaged wiring. Call an electrician to check and replace any damaged wiring.

Circuit breaker trips

Your home breaker is designed to trip, to protect your system from overload or power surges. When these protective trips occur, it’s easy to switch your breaker back on and continue using your efficient system as normal. However, frequent circuit breaker trips are a sign of something deeper and dangerous in your electrical system. Call an electrician to confirm as soon as you observe this.

Cheap or fake electrical products

You can find cheap electrical products for your home in Southern California anywhere. While the lower than normal price may seem enticing, most of such products are made with fake materials or not up to industry standards. They can go on to create dangerous problems or electrical hazards in your home. Always purchase quality electrical materials or products for your home.

Install an EV Charging Station at Home in 2020

Posted on September 10, 2020 | by K Hopkins

When you own an electric car an EV charging station at home is almost a necessity. It offers you convenience and the chance to have your car charged and ready to go when you need it. Depending on the charging option you use, the installation can be easily affordable or expensive.

Read on as we explore the types of EV charging and how they are installed.

Level 1 electric car charger

Level 1 chargers are the most accessible and affordable option. The charger comes with your electric vehicle and requires no special installation. You only need a 120volt wall outlet to plug in the charger. It’s easy to set up yourself and bears no extra costs, as a standard 120volt outlet can be found in almost every home.

The major drawback with this option is the slow/trickle charge of level 1 charging stations. You will need to charge for longer and not drive many miles.

Level 2 electric car charger

While level 1 chargers are slower and more affordable to use, level 2 EV chargers are the opposite. To use a level 2 charger you need a 240volt outlet run from your breaker to the charging station. This installation will require the expertise of an electrician. The electrician will first determine if your breaker panel can accommodate the addition. If not, you will need an upgrade to have enough power for the charging station. The installation process involves attaching a double-pole circuit breaker at once to two 120volt buses using a 4-strand cable. Be sure to turn off the power in the electric panel during this project to prevent shocks or accidents.

After connecting the circuit breaker to the buses, run the fully insulated 4-strand cable to the location for the charging station. Mount your charging unit and attach it to a 240volt cable. Permits and inspections are often required for this charging station installation. The cost to hire an electrician for the installation is often between $200 and $1200.

Level 3 electric car charger

Level 3 chargers are the most expensive and power-demanding. They are mainly used in commercial and industrial buildings. Level 3 chargers are also known as DC Fast Chargers and are easily recognized in public charging stations. They cannot be installed at home. Level 3 chargers offer the fastest charge and are not compatible with all electric vehicles. The costs to use public EV charging stations vary.

Do I Need A Permit To Replace an Electrical Outlet?

Posted on August 3, 2020 | by K Hopkins

This question would often come up if you are considering doing some electrical work yourself. While DIY is great and even cost-effective for some tasks around the home, electrical works are very different and some rules apply.

There are several reasons you might need to replace an electrical outlet. From outlets not being installed where you need them to having faulty outlets are all good reasons. However, the first thing to remember is that electrical works are best left to licensed and professional electricians. If you have no experience or skills to perform the work yourself, then do not attempt it at all.

You will require a permit to replace an electrical outlet. Read on to see how this works.

The role of a permit in electrical projects

Permits and building codes are designed to protect you and your home by ensuring that a project is done safely and correctly. An inspection which is the last part of any project involving a permit helps to enhance this safety by spotting mistakes and preventing extensive repairs.

When it comes to electrical work and electrical permits for homeowners going DIY, it’s important to note the following;

Only the owner and occupant of a home can obtain a permit to do the work themselves. This means as a homeowner looking to DIY you cannot perform any electrical services on a house about to be sold, on rent, lease, or exchange. Only a professional electrician can pull a permit and perform the electrical service in all situations.

When is an electrical permit required?

As a landlord or homeowner, you may not require a permit to replace electrical appliances or perform maintenance on existing installations. Other electrical works that usually require a permit include;

Install or alter any permanent wiring or electrical device
Installing a new electrical outlet or light fixture
Install additional wiring in your home.
Installation of a receptacle for a garage-door opener
Converting a fuse box to a circuit breaker
Installing or altering low-voltage systems such as security alarms

You can always call the local building department in your area to clarify any uncertainty on what electrical projects require a permit.

What do I need to do to get an electrical permit?

An electrical permit is only issued by your local building department. After confirming that your electrical project requires a permit that can be obtained by you, the first step is to complete an application. The permit application is usually offered in-office and some jurisdictions offer it online or via fax.

Next comes the permit fee, which depends on the complexity of your project. After the permit is issued you can perform the electrical work. An inspection should also be scheduled as soon as possible to complete the process.

Electrical codes, restrictions, and rules.

Part of the reasons why hiring a professional electrician for your electrical needs is safer and preferable to DIY is their knowledge of current electrical codes. Before you attempt any electrical work, get updated on the dos and don’ts of the NEC.

Can a Homeowner Replace Electrical Panel?

Posted on July 28, 2020 | by K Hopkins

Your home’s electrical panel is the source of electricity to your home. It is where the power from your utility company is distributed across circuits, outlets, and all areas where they are needed in the home.

All too often, homeowners try to DIY some electrical services and the short answer to the topic question is yes. The long and safer answer, however, is no.

An electrical panel should only be replaced for reasons such as the following;

The panel is faulty
The panel is old/ you live in an old home
It’s not up to code
You need to add a new appliance, renovate your home, or need more power.

Why an electrician should replace an electrical panel?

Replacing the electrical panel can involve rewiring the home as well. It also means having to deal with permits, a dangerous amount of electricity, and so on.

An electrician should be one to replace or repair an electrical panel because they are trained, experienced, and knowledgeable on the project. An electrician knows the safety measures to put in place to protect himself and your home while working on such a demanding project. Electricians are updated on the latest National Electrical Code information. They are insured to cover any injury or damage gotten from the project – which is unlikely for a homeowner.

Taking directions or advice on the process from online sources still means you are unsure or uninformed about what you’re doing and this could lead to fatal injuries and fire.

What you need to know before replacing your electrical panel?

You will need a permit. A panel replacement is a serious electrical project that often requires the technician performing it to pull a permit.

In some states, it’s illegal for a homeowner to do electrical works themselves. You would be unable to pull a permit in this situation. You would also need to get the final work inspected.

It goes further to when or if you intend to sell your home. Some states require that homeowners provide a list of all modifications or repairs done to the home without a permit.

Before you take on replacing the panel yourself, it’s important to first check with your local laws and know what’s legal or required.

Learn the safety measures involved and understand the steps well before starting the project.

While many homeowners can replace their electrical panel, most choose to leave it to the professionals. The cost and hassle of hiring an electrical technician for the project are worth it when your safety is on the line. A professional replacement guarantees a reliable system and no conflicts with the law. You can get an inspection, sell your home smoothly, and enjoy your upgraded electrical system as you want.

With experienced electricians such as The Electric Connection, a panel replacement can be affordable and stress-free. We do our best to make this less worrisome or intrusive on your part. Start by scheduling an inspection to confirm if your panel should be replaced or repaired.