The Electric Connection’s Blog

Los Angeles Electrician – Smoke Alarm Considerations

Posted on | by K Hopkins

Having smoke alarms is one of the essential ways you can protect your family in your home. The NFPA (National Fire Protection Association) has estimated that nearly 70 percent of those who perish in a house fire were in homes where there was no smoke alarm. Additionally, it is estimated that nearly one thousand deaths per year could be prevented by installing smoke alarms in every home. Learn more about the considerations you must make regarding smoke alarms and then call a Los Angeles electrical company, such as The Electric Connection, to install this important device today.

Building Codes

There are building codes that mandate the installation of smoke alarms. These are developed at both the state and local level. Since there are so many codes and requirements you must keep in mind, it is recommended that you find an electrician in Los Angeles that has a thorough knowledge of NFPA 72 – National Fire Alarm Code as well as these local ordinances.

Location

It is important not only to have a smoke detector, but also to install enough and install them in a proper location. It’s important to install the number of smoke detectors that are required in your area. Additionally, connecting the detectors, means that there will be an early warning if a fire breaks out in another part of the home. When working with an electrician, Los Angeles residents should request that the detector be mounted on the ceiling or high on the wall.

Power Source

A smoke alarm can operate on batteries, electrical systems or a combination. An alarm that operates on both is most desirable, since it protects you even if there is a power outage or dead battery situation. Testing your smoke alarm regularly is vitally important to make certain it will be there for you when you need it.

If you want to talk to a Los Angeles Electrician about installing a smoke alarm system in your home, visit us at ElectricConnection.com or call us at The Electric Connection today.

Los Angeles Electrician – Federal Pacific Panels

Posted on | by K Hopkins

Do you or does someone that you know have a Federal Pacific Electrical panel in their business or home? There are a number of reasons that these panels are unsafe, which means that they should be replaced as quickly as possible. One of the first reasons is simply because they are so old. Federal Pacific panels have not been installed in many years. The main reason that they should be replaced by your electrician in Los Angeles is because the circuit breakers in the panel may not always trip whenever they should. This can lead to some very serious issues with your home’s electrical system.

An Example

A couple years ago, one of our technicians were called out to inspect a circuit wire that appeared to have bubbled up. Whenever he arrived at the location, he discovered that this particular circuit had been overloaded so far that the sheath covering on the cable started to boil. Upon further inspection, he found out that the power for this particular cable came from a Federal Pacific electrical panel. What happened, was that the homeowner’s air conditioning unit was experiencing issues that caused it to seize up, continuously pulling more and more power from the panel. Rather than tripping like it should have, the circuit breaker remained on, leading to the boiling cable sheathe.

Although we were able to correct this problem relatively quickly, it could very easily have turned out much worse. This overloaded wire could have caught fire, or remained unnoticed and poorly insulated until it came into contact with a person or with another item that led to serious electrical shock or other injury.

The moral of the story is to have your home regularly inspected by a Los Angeles electrician for proper safety. For more safety tips or information about unsafe electrical panels, visit The Electric Connection at www.theelectricconnection.com.

Burbank Electrician – AC / DC What’s The Difference?

Posted on | by K Hopkins

Almost everything that we use on a daily basis operates on electricity. Every modern convenience that we have become used to relies on this fundamental utility. Without having a constant and reliable supply of this incredible technology, the world as we know it would grind to a screeching halt. In order to provide this powerful utility to our devices, two different forms of electricity have arisen: AC and DC.

AC means alternating current. This is the type of electricity that is used most frequently in devices that require a lot of power to operate. DC means Direct Current. It is most frequently found in devices that do not require a large amount of electricity to operate.

What’s The Difference?

DC was the original form of electricity that was generated by Thomas Edison. This form of electricity will send its current in a single direction only. This forms a direct loop. In most cases, DC current is only used in devices that use batteries. This means that any device that you have in your home that uses batteries operates on a DC system. When we charge these batteries, they transform the AC current from your wall into DC current.

AC power is the most common type of electricity, and is the form that your electrician in Burbank works with most frequently. The way that alternating current has been designed, it can move in both directions at the same time. This means that current will be present at every single point on the grid at any given time. If you use electricity from the power grid, then you plug into AC current every single day.

While you may not always think about it, having this reliable AC current is paramount to our everyday lives. For any further questions, or for help with any electrical issues that you have, don’t hesitate to get in touch with a technician at The Electric Connection. We also have a variety of additional resources available in our website at www.theelectricconnection.com.

Beverly Hills Electrician – The Importance of Surge Protection

Posted on | by K Hopkins

Were you aware of the fact that your home electrical equipment is frequently bombarded by very brief spikes in electrical power called power surges? These surges can slowly burn up the inside of your electronic devices, leading to a shorter lifespan than you should normally have. Although the most dangerous type of power surge comes from outside of your home and could destroy your devices in one fell swoop, this type of surge only accounts for about 30% of all power surges. The other 70% of power surges are generated from within your home. These surges are caused by some of your larger appliances like refrigerators and air conditioners.

A large power surge causes very fast, widespread damage. This can cause your wiring to burn up, devices to short circuit and motors to seize. Whenever you think of power surges, this is typically what comes to mind. The majority of power surges, however, remain unnoticed until your device meets an early end. This type of incremental power surge slowly eats away at the components of your electronics until they no longer function.

While it may seem like there is not much that you can do to prevent this, there is. One of the best ways to prevent against both large and incremental power surges is with surge suppression systems. This includes a combination of both local and whole house surge protection. For the largest level of protection, you should have your local electrician in Beverly Hills install a whole house surge protector. You can then protect especially sensitive devices with their own individual surge protectors.

By protecting your home from power surges, you help to ensure that your devices have a long lifespan. This not only keeps everything running as it should, but also saves you money in the long run. If you have any questions about whole house surge suppression, or would like to schedule an appointment for installation, get in touch with any of our technicians at The Electric Connection. You can also learn more from the resources at The Electric Connection website .

Glendale Electrician – Why Copper Wires?

Posted on | by K Hopkins | 1 Comment on Glendale Electrician – Why Copper Wires?

Whether you know it or not, copper wires are the most commonly used type of wires in our home electrical systems. Why is it that your electrician in Glendale and any electrical utility company values the use of this type of wiring over all of the other technologies available? The simplest answer is that copper wiring is just the best solution for the job. Copper wiring is extremely ductile and malleable. Furthermore, it has superior heat and electrical conductivity. Because of these properties combined with the fact that it is robust and rustproof, copper wiring is a nearly perfect material for any electrical wiring. The properties outlined above allow copper wiring to carry our electrical currents over distances that are much longer than wires made up of other materials.

By far, the most desired property of copper wiring is its incredible conductivity. When compared with other non-precious metals, copper comes out on top in regards to conductivity every time. Because of its robustness, it can also carry a larger amount of electricity for the particular diameter of that wire. What this means for an electrician as that copper wiring will experience less loss as the electricity moves through it. To further add to its case, copper wiring has the chemical makeup that make it highly resistant to the harsh environments that many wires must stand up to. It can withstand many different elements, is corrosion resistant and will not rust. For this reason, it is highly prized as an ideal electrical conductor.

Chances are, the walls in your home are filled with copper wires of all different shapes and sizes. Your Glendale electrician took great care to plan out and install a system that was ideal for the needs of your home. Because copper wiring was used, you can be assured that they will last for many years to come, all the while providing you with a high quality electrical current.

If your home has aluminum wiring or any other wiring materials in it, please don’t hesitate to contact The Electric Connection. You can read more about electrical wiring at our company website at www.theelectricconnection.com.

Pasadena Electrician – Home Wiring Inspections

Posted on | by K Hopkins

Because of the rich history of home ownership that we have in the United States, the country is still the home to any number of homes that were built before most Americans were even born. Through preservation and careful maintenance, there are even homes that were built in the Victorian Era and prior. Although these homes are often prized for their historical significance, the electrical systems within can be very dangerous if they have not been brought up to date with current standards. Testing electrical outlets for proper operation and flicking light switches on and off is typically not a sufficient level of testing for an electrical system, especially when the electrical system is potentially very old.

Most homes built prior to the 1940s were constructed with knob and tube wiring, that has not been used for many years. Whenever you move into a home, you should not take it for granted that the previous owner took the time and care to have all of the electrical components upgraded to safer, more current technologies. This is one of the reasons why you should have your own electrician in Pasadena come out to do a full home safety inspection.

A full home electrical safety inspection can end up saving you and your family extensive time and money in the long run, especially if it is able to identify any key problems with your current electrical system. During an electrical safety assessment, a technician from The Electric Connection will come out and do a full check on your electrical system. During this time, we will discover whether or not you have any outdated wiring systems, an ungrounded electrical system, or an undersized electrical panel. If we discover any issues, we will put together an action plan to address these issues.

For more information on getting in touch with our team, or to learn more about the potential issues you could be facing, read through the resources at The Electric Connection website at ww.theelectricconnection.com.

Electrician Los Angeles – A Few Practical Energy Conservation Tips

Posted on | by K Hopkins

Each and every household has at least one reason to conserve energy. This is a very basic idea, and should be important for everyone in all classes of society. By conserving energy you are being less wasteful, which can have a positive impact both on the environment and on your monthly energy bills. In most areas, electrical utility companies still use fossil fuels to provide our homes with the electricity that we use on a daily basis. This includes materials such as natural gas, coal and oil. The exhaust and other by-products of burning these fuels can be very harmful to the environment. Furthermore, they all have a limited supply that is rapidly declining due to the increased demand placed by humans.

What can you do to conserve energy at home?

One of the best places to start is to use your appliances mindfully. By this, we mean turning them off when they are not in use. For further power savings, you can even unplug them or turn an attached power strip off to avoid losing any “standby” power.

Your large home appliances, such as washing machines, dryers, refrigerators, air conditioners and heaters can account for up to two-thirds of the energy that you use at home. By unplugging them when not in use, or ensuring that they are only being used when necessary, you can make a significant dent in your electric bill. Take important steps such as turning your thermostat up when you leave the house, or improving your insulation. You can have your electrician in Los Angeles install time-saving devices such as programmable thermostats and dimmer switches to make this job even easier for you.

The bottom line is that everyone should be doing their best to conserve as much electricity as possible. While the effects may seem small, they truly add up and can benefit you both personally and everyone around you. For more ideas about energy conservation or help with an electrical installation or repair project, contact The Electric Connection. (Click Here).

Santa Monica Electrician – Reasons to Call Your Electrician Right Away

Posted on | by K Hopkins

One of the things that makes electrical troubleshooting so difficult is the fact that your electrical system is largely behind the scenes. Located behind your walls and in your ceiling, many issues will not manifest until they become very serious. As a result, it can be very easy to ignore electrical problems until they come to a point where they can no longer be ignored. To combat this, especially if you live in a n older home, you should have an electrician in Santa Monica inspect your electrical system regularly. By doing so, you can avoid many issues that result from an aging home and electrical system.

In addition to having a regular inspection, you should also educate yourself on the early signs of electrical issues. If you notice any of the below, make sure that you get in touch with a Santa Monica electrician right away. It can save you significant time and money if you take care of the issue early on, rather than when it becomes a real problem.

Lights Dim Unexpectedly

Do you have lights that dim whenever large appliances, such as your air conditioner cycles on? If these high-demand appliances are not on dedicated circuits, then they could be causing electrical issues within your home.

No GFCI Outlets

According to most local building codes, a ground fault circuit interrupter (GFCI) outlet is required in all areas that are frequently wet. This includes kitchens, bathrooms, utility rooms and garages. If you do not have these, call The Electric Connection or click here.

Ungrounded Outlets

Older homes were often equipped with outlets that do not accept three-pronged, grounded plugs. This is a very strong indication that your electrical system is not grounded. If you have an ungrounded electrical system, then you could be exposing yourself to unnecessary dangers every time you use your electrical system. Have someone inspect your system and provide the proper grounding if necessary.

Pasadena Electrician – Avoiding Breaker Panel Fires

Posted on | by K Hopkins | 1 Comment on Pasadena Electrician – Avoiding Breaker Panel Fires

It is estimated that each year around 3,500 Americans die in home fires and 20,000 are injured. A leading type of home fires is the electrical fire. This is especially true in regards to manufactured homes. When it comes to breaker panel fires, there are currently two different brands of panels that have known manufacturing flaws that puts anyone with one of these panels at risk for an electrical fire. Zinsco panels and Federal Pacific Electric panels are known for the dangers that they pose. In addition to these two brands, there are also many people who have panels older than 40 years old that may not provide the protection that is needed to protect their homes properly from electrical dangers. If your home has one of these panels, you should get in touch with an electrician in Pasadena right away to ensure that the proper steps are taken to safeguard you and your family.

Federal Pacific Electric Company (FPE) Panels

The FPE was one of the largest circuit breaker panel manufacturers in North American from the 1950s to the 1980s. As time went on, many electricians discovered the dangers that these panels posed to the families that they were supposed to protect. It is now known that FPE panels may appear to work for many years, but can overheat and become a fire hazard after only one short circuit or overcurrent.

If you have a breaker that fails to trip whenever it is supposed, it can allow an incredible amount of electricity to enter your home from your electrical utility company. Whenever this happens, it can lead to severe overheating and electrical fires. As a result, many panels such as these older FPE panels can eventually catch on fire, leading to a very serious issue for any homeowner.

Zinsco Panels

Zinsco panels were also very common at one point in time. Although there are not many of them remaining, they can be very dangerous in the modern setting. These panels are simply not designed to handle the amount of electricity that we use every day.

For more information on electrical panels, (Click Here), or to schedule an electrical panel upgrade, call our team at The Electric Connection today.

Glendale Electrician – Why is an Electrician’s BBB Rating Important?

Posted on | by K Hopkins | 1 Comment on Glendale Electrician – Why is an Electrician’s BBB Rating Important?

One of the most important parts of hiring an electrician is screening and selecting the right contractor to work with. While this task may seem tedious at times, taking a little bit of time to do your due diligence at the onset can save you significant time and headache later on. By grading each contractor that you are considering by a number of variables, you can make your job a little bit easier. One important thing to consider with any electrical contractor is their rating with the Better Business Bureau.

Why should you care about a contractors’ Better Business Bureau rating? In a nutshell, the BBB is one of your best sources for learning more about a business’ track record. While customer testimonials should always be read with a grain of salt, complaints made to the Better Business Bureau are researched and responded to. Whenever a company has a longstanding A+ rating with the BBB, you can be sure that they have a reputation of upholding high standards of work and customer service. Furthermore, you can view any prior complaints to see how a business responds to any complaints that have been made.

In addition to giving you an idea of how many complaints an electrician in Glendale has received, knowing how they are responded to can be valuable information. A company that cares about its customers will take the time to properly address and fix any legitimate complaints, while a shoddy contractor may just brush them off.

With a little bit of research and the proper resources, you can find a high quality contractor that can take care of any and all of your electrical needs. The Electric Connection  holds an A+ rating and takes pride in the service that we provide. Please don’t hesitate to call us or visit our website for consideration in your next electrical project.