Tag: electrical wiring

Los Angeles Home Electrical Inspection

Posted on | by Kim Hopkins

home electrical inspectionThere are certain times when an electrical home inspection is recommended. If you are just purchasing a home it’s a good idea to have it inspected so you can be sure you’re not buying into any major issues. When you have lived in your home for a while or if it is an older home, an inspection is a great idea to ensure that everything is running properly. Finally, if you are adding an appliance or doing any large renovations, you should have you electrical checked out to make sure that it can handle the new technology you’re bringing into your home.

To get the best results, a licensed electrician must perform this home electrical inspection service. The electrician will be able to perform several tests on your electrical system whereas a homeowner or buyer can only visually inspect it. When you hire an electrician for this safety procedure, you can be sure they will have the tools necessary to perform the job as thoroughly as possible.

Why Is A Home Electrical Inspection Important?

The NFPA, or National Fire Protection Agency, reports that between 2007 and 2011 there were more than 144,00 house fires caused by electrical failure. Many of these could have been prevented if a simple inspection had been completed. A home inspection can reveal electrical issues such as deficiencies or fire hazards.

What Does A Home Inspection Consist Of?

Many electricians offer an inspection of home electrical system as a service. Most electricians have a standard checklist for electrical home inspections. It can vary from contractor to contractor but at the least the following should be performed:

  • Verification grounding is present
  • Light bulb wattage verification
  • Inspection of switch and outlet operations
  • Examination of ARCIs
  • Make sure there are no shock hazards present
  • Verification of lighting safety
  • Proof of surge protection
  • Smoke and carbon monoxide detector testing
  • Electrical panel inspection
  • Review of outdoor electrical system

Once the inspection is completed, an electrician will provide you with a detailed report concerning your electrical system. The more serious issues will be listed first. After the inspection is completed, the electrician will walk you through the issues that are present in your home. He or she will provide instructions on how to proceed with any dangerous problems that might be in the report.

Home Inspection for Electrical DIY

A licensed electrician in necessary to have an official report but if you want to just check the safety of your home you can visually inspect the major problem areas.

The first place to look is your electrical panel. This is where your home gets its power from. It’s the grey or metal box that has all the fuses or circuit breakers in your home. When inspecting your panel be sure to note the age, any wear and tear, or any dark or smokey debris. If you notice that the panel is older and outdated, it may be time to have a panel upgrade performed.

Next, check out the wiring in your home. This one might be a little more tricky as most of the wiring inside your walls. If you have an attic or a crawlspace that is easily accessible, see if you can see the wiring that way. Knob and tube wiring or aluminum wiring pose potentially hazardous settings in a home. Be sure to call an electrician to inspect this wiring if you find it.

Any outlets that are near water must be fitted with GFCIs. This includes outside outlets as well as those near sinks or tubs. Be sure to check them periodically to ensure the safety features are working.

Inspecting your home electrical system yourself can save money but will not be as thorough as an official home electrical inspection done by a professional electrician. If you have any concerns, please contact a professional to inspect your home.

The Electric Connection has provided homeowners with safety inspections for over 30 years. We are proud to service the Los Angeles area. Homeowners and businesses are encouraged to call The Electric Connection for their next electrical project. We are happy to help! Learn more about our electrical inspection services here.

House Rewire Warning Signs & Things to Consider

Posted on | by Kim Hopkins

los angeles house rewireHow can you be sure that a house rewire is necessary? The wires in your house deliver the electricity throughout your entire home so you need to be sure that you get advice from the experts. Fortunately, there are few things you can check out before you call any electricians out to your house.

The first thing to consider is the age of your home and electrical panel. If your house is over 50 years old, there’s a good chance it needs to be rewired. At the very least you should have the wiring in your home inspected by a professional. Homes over 50 years old may contain knob-and-tube or aluminum wiring. These types of wiring are outdated and can potentially pose extreme dangers.

Other warning signs that you may need a whole house electrical rewire include:

  • Circuit breakers that are tripping frequently
  • Blown fuses
  • A burning smell that won’t go away
  • Sizzling sounds without apparent sources
  • Outlets or switches that look discolored or charred

If you are noticing any of the signs above, it’s probably a good time to call your electrician to schedule an inspection. Many electricians are happy to provide customers with whole house rewire estimates. This can be a very large investment so it’s important to call around to find multiple estimates for the job.

It is fortunate, though, that rewiring a home is usually a once-in-a-generation expense when done right. It’s important to weigh the risks versus the expenses when considering this project. Improper or outdated wiring can cause many issues including fires so it’s a job that shouldn’t be put off too long. A report by the US Fire Administration states that from 2010 to 2014, 45,210 home structure fires involved electrical malfunctions or failure. Annually this led to 420 deaths and over 1,300 injuries. These fires also caused $1.4 billion in property damages.

House Rewire: Things to Consider

You might be thinking, ‘what is a full house rewire?’ Well, it’s much like it sounds. Rewiring a home involved removing as many of the old wires as possible to make room for wiring that is not only new but also up to date. Non-metallic wire, or Romex, is used because it is generally safe and easier to work with. It won’t get hot when it is surrounded by insulation.

The new wiring can be installed by tearing out walls to run the new wires and then sealing the new installation behind drywall. This can be very expensive and may take a bit of time to complete. The fewer walls that need cut the less the job will cost. If the wiring can be run through a crawlspace or attic this is ideal for keeping down the cost.

Another option electricians may choose is to take the wiring and fish it through the walls with rods and thin metal, called fish tape. This is usually used in older homes to keep up the integrity. Instead of tearing down walls, small holes are made and then patched up. Using this method helps preserve the plaster walls.

When a house is being rewired, it is almost always recommended to also upgrade your panel. Older homes generally have a smaller capacity panel but when you rewire your home you’re allowing for more conveniences which might put more strain on your panel. If your home has a 60 amp panel, it’s a good idea to update it to 100 amp. This will allow you to bring more comfort into your home without the worry of tripping circuits.

Whether you need a new light fixture installed or are getting your whole home rewired, choosing the right electrician is very important. Don’t just hire the cheapest person on the market – be sure to do research and get multiple bids from professionals. In the end, it will be worth it to know that your house rewire job was done safely and correctly.

You local electrician at The Electric Connection can perform whole house rewires with ease. Our technicians have the expertise and experience necessary to get the job done correctly and quickly. Click here to learn more about our house rewire services or give us a call at (818) 446-0888.

10 Reasons to Call a Glendale Electrician

Posted on | by Kim Hopkins

Owning a home can be an exciting adventure. However, owning a home comes with the knowledge you are going to have to invest in the home on almost a monthly basis. It doesn’t matter how new your home is, you are going to run into issues that require you to hire professional help to resolve. While many homeowners prefer to handle as much of the maintenance and upkeep on the home themselves, there are time when problems should absolutely be left to the professionals. Anything having to do with electricity in the home should always be left to an electrician. Glendale homeowners can count on The Electric Connection to provide timely, professional service when they need it.

The following are a few reasons to call a Glendale electrician.
1. Installing new ceiling fans or light fixtures.
2. Electrical shorts that are causing breakers to trip on a regular basis.
3. The smell of burning wires or obvious signs of burning on or around light switches or electrical outlets.
4. An installed light fixture in a room isn’t working or only works on occasion. If the lights flicker or make a buzzing or cracking sound you need to call an electrician in Glendale.
5. If you are transforming a room into an office and need additional outlets.
6. An outlet is dead or not working.
7. You are planning a remodel or upgrade to your kitchen.
8. If your home is older and you are concerned about outdated wiring, an electrical inspection is a great idea.
9. You have an electric car and would like to have a charging station installed in your garage.
10. Your existing electric panel is not providing enough electricity to the home to make it fully functional.
These are just a few of the more common reasons to call a professional electrician. When in doubt, give The Electric Connection a call and talk with a professional.

Dangers of DIY Electrical by Santa Monica Electrician

Posted on | by Kim Hopkins

There is a real sense of pride and satisfaction when you take on a task that is daunting and challenging and you actually pull it off. Taking on a do-it-yourself task can be fun and rewarding. You learn a lot and you get the experience of working with your hands. Sometimes, DIY projects can be great and other times, they end up being complete failures you can laugh off. However, there are some DIY jobs you should never attempt. Anything that puts your life at risk or risks the overall safety of your home is simply not worth it. Electricity is no joke. If you have a job that requires electrical wiring, it is best left to a certified electrician. Santa Monica homeowners can count on the team at The Electric Connection to take care of any electrical repairs or new installations.

Electrical repairs or installing new light fixtures may seem simple enough on the surface, but one small mistake could be extremely dangerous. It isn’t worth the risk. Always call an electrician in Santa Monica to handle the electrical side of any DIY project and you can take credit for the rest. In many cases, a DIY project that involved electricity is against county and city codes. Permits are generally required for remodels and renovations, which will need an inspection.

You want your home to be safe and don’t want to have to worry about an electrical short due to faulty wiring. This can be avoided by letting a Santa Monica electrician take care of that part of the project while you focus on picking on the new fixture or putting on the paint. Have fun with your next DIY, but always remember safety first and give The Electric Connection a call to handle any electrical work that goes with the project.

Replacing Old, Tired Light Fixtures with Glendale Electrician

Posted on | by Kim Hopkins

Out with the old and in with the new can make a big difference in the way a room looks. Every decade or so, there are new trends in home decorating and construction. Those new trends are appealing to potential buyers and for those who don’t plan on selling, but like the latest trends, you can enjoy them too with the help of a Glendale electrician. One of the trends that tends to change often is lighting. You don’t have to completely remodel your home to stay with the times. You can call The Electric Connection and have new light fixtures installed that make your home look and feel more modern.

There are some other advantages to upgrading your old light fixtures as well explains an electrician. Glendale homeowners that want to use the more energy efficient bulbs on the market may need to have a new fixture installed to accommodate the bulbs. Those LEDs that are very popular right now don’t always work in the older fixtures. CFLs may also be too long or too wide to fit into an existing fixture. If you haven’t been into the lighting department lately, take a trip and discover all of the new styles. You will be amazed.

When you choose to update the old fixtures with newer, more energy efficient light fixtures, you are also getting the peace of mind knowing the electrical wiring is safe and up to code. When your Glendale electrician is taking care of the removal of the old fixture and the installation of the new, the electrician will get a peek at what’s happening behind the walls and in the ceiling. This can tell you the condition of the wiring and whether you need to consider having other outlets, switches and fixtures replaced. Give The Electric Connection a call today and schedule your new lighting installation.

Bad Outlets by Pasadena Electrician

Posted on | by Kim Hopkins

Electrical outlets are so common in a house, they can be easy to overlook. Because we all know how important electricity is to our daily lives, it makes sense you would want to make sure it is there when you need it. You also want to make sure it is safe. Electricity is a necessity, but it is risky when not used properly or when the wiring moving the electricity through the house is damaged or faulty. It isn’t all that uncommon to come across a bad outlet in a home explains an electrician. Pasadena homeowners can rely on the professional team at The Electric Connection to take care of any bad outlets around the house.

There are a few key signs you need to know so you can identify a faulty outlet before it becomes a serious problem.

1. Black streaks that shoot up the wall or down are a bad sign. If possible, turn off the breaker to the outlet and call an electrician in Pasadena to replace the outlet right away. An outlet that has these streaks can cause a fire whether there is anything plugged in or not.
2. If you smell burning wires, which tends to have a metallic, rubber smell, cut power to the outlet and call for service.
3. If an outlet doesn’t work at all, it is likely because the wires have either become disconnected or have no electricity running to them. Both are bad signs and need attention.
4. Snapping, crackling or other sounds coming from within the wall where the outlet is placed could be a sign of slow burning. Cut the power and get a Pasadena electrician to take a look at the wiring.
5. Outlets that are loose and wiggle need to be securely fastened to keep the wires from jiggling loose and possibly sparking a fire.

If you have noticed any of these signs, give The Electric Connection a call to take care of the problem for you.

Home Remodels with Santa Monica Electrician

Posted on | by Kim Hopkins

Have you recently purchased a fixer upper? With all of the home renovations shows on television these days, you may be inspired to invest in a house that needs a little help. Transforming something old and damaged into something new and lovely is exciting. It can be very fulfilling to get your hands dirty and apply your creativeness to a home renovation. It doesn’t matter if you are planning on flipping the home or making it yours to love. Part of any home renovation is going to include some electrical work, which will require the services of a professional electrician. Santa Monica new property owners can rely on The Electric Connection to take care of the electrical portion of the renovation.

Redoing walls and floors is only half the project. Sometimes you may need to bring an old home into the 21st century with new, safer electrical wiring explains an electrician in Santa Monica. Once you know the wiring is safe and ready to handle the demands on the electric panel, you can move on to the good stuff. Choosing floor material, wall colors and cabinetry is exciting, but the electrical is the first big step.

In some cases, you may be removing walls, which are likely to have wiring behind the sheetrock. This will need to be moved or disconnected by a Santa Monica electrician. Part of your planning will include installing new light fixtures and having outlets installed. With the current trend of having large, flat-screen televisions mounted to the wall, it is a good idea to have an outlet placed high up on the wall. It is the little details like these that can take a home renovation from good to great. It’s all in the details. If you are ready to get started on your home renovation project, give The Electric Connection a call today.

Replacing Dangerous Wiring by Glendale Electrician

Posted on | by Kim Hopkins

One of the biggest fears a homeowner can have is the thought of losing their house to a fire. Home fires are far too common. All it takes is a small mistake or a little accident to create a horribly devastating fire that destroys all of the world possessions a family owns. One of the leading causes of a home fire can be blamed on faulty wiring. This is generally through no fault of the homeowner. There are nearly 375,000 house fires each year. There are a few things you can do to reduce the risk of your home catching fire explains an electrician in Glendale. You can count on The Electric Connection team to provide you with more information related to electrical fires.

1. More than half of the fires in homes is caused by cooking. Be extra careful when using grease and always ensure the stove and oven are off when you go to bed or leave the house. Be attentive anytime you are cooking.
2. Heating is the second leading cause. If using a woodstove or fireplace, ensure it is properly cleaned and maintained.
3. Electric wiring that is old should be inspected by a Glendale electrician. Cloth-insulated wiring is outdated and unsafe and should be replaced.
4. Have a whole home electrical safety inspection completed by an electrician. Glendale homeowners will get a detailed report of potential hazards as well as things that absolutely should be addressed right away to prevent an accident.
5. Have working smoke detectors in every room. Consider hard-wired smoke detectors as well that are more effective at alerting the entire home to a fire.

Due diligence and being a little more attentive can help prevent fires in the home. If you would like an inspection of your wiring or need a quote for electrical repairs needed to make your home safer, give The Electric Connection a call today.

Bold Lighting Schemes by Burbank Electrician

Posted on | by Kim Hopkins

We all have a unique style. Some people loathe being part of the mold. They want to be different and step outside of the box. This applies to the way they dress and the way they decorate their personal spaces. When you own your own home, it is all about expressing yourself with your favorite color pallets, artwork and even furnishings. Another way you can help bring your personality and style into your home is by choosing some bold, innovative lighting schemes with the help of your Burbank electrician. The team at The Electric Connection is here to help you make your personal style stand out.

You are no longer relegated to the standard light fixture in the center of a room or forced to rely on colored bulbs or quirky lamps to express your style. An electrician in Burbank can help bring out your personal style with a variety of installed light fixtures that are functional and bold or classic and elegant. It is all up to you. You can have several lights or a single one. That’s part of the joy of designing your space—you have all the power. You can choose how bright, how dark and how funky your lighting scheme is.

Once you have come up with what you want, you need to call your electrician. Burbank homeowners will need to trust the expert when it comes to the wiring and installation of each of the fixtures. You can ask for dimmer switches to be installed or a wallplate with several light switches that give you the freedom to control the lights from one place in the room. The possibilities are endless. Do some shopping around and find the fixtures that call to you. Then, give The Electric Connection a call today and schedule your new lighting installation.

Electric Safety Enhancements with Glendale Electrician

Posted on | by Kim Hopkins

Keeping your home safe is a top priority. Locking your doors, taking care of tripping hazards and making sure there are no obvious areas that could be a danger to you and the people visiting your home is real concern. Sometimes, you can’t find every single, little hazard. This is why it is always a good idea to have an electrical safety inspection by a qualified electrician. Glendale homeowners can count on the team at The Electric Connection to complete the inspection and give them a detailed list of things that could be a problem.

Some of the biggest hazards are not always obvious. In many cases, an alert homeowner can identify electrical problems and call an electrician in Glendale to take care of it before it becomes a much bigger concern.

1. Electrical outlets that have black marks or don’t always work are telltale signs. Check the outlets in the bathroom and kitchen area. If they are not the GFCI outlets, you can help prevent electric shock by having the old outlets upgraded to the GFCI outlets.
2. Having an electrical inspection completed can identify problems within the breaker panel. This give a Glendale electrician the chance to peek inside and see what kind of wiring there may be throughout the house. It also reveals how much room is in the electric panel in case you need to add additional breakers to accommodate for those that may be overloaded.
3. Breakers that are constantly tripping should absolutely be checked out by a professional. As mentioned in number two, adding another breaker or two to the panel can help alleviate overloading a breaker.

These are some of the most common signs of electrical hazards that you can easily take care of. Give The Electric Connection a call today and have your home inspected to make those safety upgrades.